How to root Android smartphone: Lenovo Vibe S1

29 Oct 2017
Flashing Tutorial: How to root/flash your Android smartphone: Lenovo Vibe S1

Flashing Tutorial: How to root/flash your Android smartphone: Lenovo Vibe S1

The Android smartphone company Lenovo launched a model Lenovo Vibe S1. lenovo Vibe S1 launch took Indian market a blow. The Android smartphone Lenovo Vibe S1 featured by 1.7GHz octa-core MediaTek MT6752 processor and it comes with 3GB of RAM. The phone packs 32GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Lenovo Vibe S1 packs a 13-megapixel primary camera on the rear and an 8-megapixel front shooter for selfies. The Lenovo Vibe S1 runs Android 5.0 and is powered by a 2420mAh non-removable battery.

Are you getting bored of your Lenovo Vibe S1 due to lack of customization and slower performance? Nothing to worry about here is a solution!! Flashing/Rooting your Android smartphone. Flashing any Android smartphone gives you extra features, customize your home screen the way you want, upgrading your smartphone to latest Android version.

In this article, we are going to teach you to flash your Android smartphone Lenovo Vibe S1. Lenovo vibe S1 has been a hugely successful Android smartphone for Lenovo especially in India and millions of Lenovo Vibe S1 users can now customise their smartphones the way they like using this tutorial.

Note: Flashing/rooting your Android smartphone voids warranty and not following the flashing/rooting procedure properly may brick your Lenovo Vibe S1 Android smartphone.

Guide for rooting/flashing your Android smartphone Lenovo Vibe S1

Also, read: /android-smartphone-flashing-tutorial-Lenovo-vibe-p1/

Download

  1. TWRP recovery 
  2. ADB fastboot drivers

There are two methods to root/flash your Android smartphone Lenovo Vibe S1

  1. Via Kingroot
  2. Via TWRP with SuperSU

Root/Flash via Kingroot

Kingroot Guide

Root/Flash via TWRP with SuperSU

Step 1: Copy the downloaded file UPDATE-SuperSU-v2.46.zip in the root folder of your SD card.

Step 2: Now in CMD type:

ADB reboot recovery

This will boot Lenovo Vibe S1 into Recovery Mode

Step 3: Once you land into the Recovery Mode, choose install from SD card and choose UPDATE-SuperSU-v2.46.zip

Step 4: When the installation is done, Reboot your device

Done!!! You have Successfully rooted/flashed your Android smartphone Lenovo Vibe S1. Now you can customize your Lenovo Vibe S1 the way you want it to look like.

RELATED POST

Leave a reply