Flashing Tutorial Android smartphone: Lenovo P2


How to root/hack your Android smartphone: Lenovo P2

The Android smartphone company Lenovo launched Lenovo P2 a budget smartphone priced Rs 13,499. Lenovo P2 is featured with 2GHz octa-core Qualcomm Snapdragon 625 processor and it comes with 3GB of RAM. The phone packs 32GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Lenovo P2 packs a 13-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies. The Lenovo P2 runs Android 6.0 and is powered by a 5100mAh non-removable battery.

Are you getting bored of your Lenovo P2 due to lack of customization and slower performance? Nothing to worry about here is a solution!! Flashing/Rooting your Android smartphone. Flashing any Android smartphone gives you extra features, customize your home screen the way you want, upgrading your smartphone to latest Android version.

In this article, we are going to teach you to flash your Android smartphone Lenovo P2. Lenovo P2 has been a hugely successful Android smartphone for Lenovo especially in India and millions of Lenovo P2 users can now customise their smartphones the way they like using this tutorial.

Note: Flashing/rooting your Android smartphone voids warranty and not following the flashing/rooting procedure properly may brick your Lenovo P2 Android smartphone.

Guide for rooting/flashing your Android smartphone Lenovo P2

Also read: /android-smartphone-flashing-tutorial-Lenovo-a6000/


  1. TWRP recovery
  2. ADB fastboot drivers

There are two methods to root/flash your Android smartphone Lenovo P2

  1. Via Kingroot
  2. Via TWRP with SuperSU

Root/Flash via Kingroot

Kingroot Guide

Root/Flash via TWRP with SuperSU

  1. Download Superuser from here .transfer the SuperSU zip to your device over MTP.
  2. Now install the phh’s SuperUser from the play store
  3. Boot into TWRP, holding power, volume up, and volume down keeping your device ON.
  4. Select [Install] in TWRP.
  5. Locate the Zip and confirm to flash.
  6. Go to [Reboot] -> [System].
  7. First boot may take some time. Do not tinker with the device until it reboots.

Done. Now you have successfully rooted/flashed Android smartphone Lenovo P2.


About Author

Be Ready for the challenge

Notify of
Inline Feedbacks
View all comments