Android smartphone Flashing Tutorial: Lenovo K6 Power

23 Oct 2017
How to root/flash your ANdroid smartphone Lenovo K6 power

How to root/flash your ANdroid smartphone Lenovo K6 power

Android smartphone Lenovo K6 power launched in September 2016 priced Rs 10499 by Lenovo. Lenovo K6 power is featured by 1.4GHz octa-core Qualcomm Snapdragon 430 processor and it comes with 3GB of RAM. The phone packs 32GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Lenovo K6 Power packs a 13-megapixel primary camera on the rear and an 8-megapixel front shooter for selfies. The Lenovo K6 Power runs Android 6.0.1 and is powered by a 4000mAh non-removable battery.

Are you getting bored of your Lenovo K6 power due to lack of customization and slower performance? Nothing to worry about here is a solution!! Flashing/Rooting your Android smartphone. Flashing any Android smartphone gives you extra features, customize your home screen the way you want, upgrading your smartphone to latest Android version.

In this article, we are going to teach you to flash your Android smartphone Lenovo K6 power. Lenovo K6 power has been a hugely successful Android smartphone for Lenovo especially in India and millions of Lenovo K6 power users can now customise their smartphones the way they like using this tutorial.

Note: Flashing/rooting your Android smartphone voids warranty and not following the flashing/rooting procedure properly may brick your Lenovo K6 power Android smartphone.

Guide for rooting/flashing your Android smartphone Lenovo K6 power

Downloads

  1. TWRP recovery 
  2. ADB fastboot drivers

There are two methods to root/flash your Android smartphone Lenovo K6 power

  1. Via Kingroot
  2. Via TWRP with SuperSU

Root/Flash via Kingroot

Kingroot Guide

Root/Flash via TWRP with SuperSU
  1. Download “SuperSU-v2.79.zip” and Transfer the file to the Internal Storage of the device.
  2. Power off the Phone and Boot into the Recovery Mode By Holding Volume Up +Down + Power. Alternatively, You can enter Recovery Mode By using the ADB Command
        adb reboot recovery
  3. In TWRP, Tap on Install, Navigate To SuperSU.zip & Select it.
  4. Swipe right to Install the SuperSu zip file. Once done, Reboot your device.
  5. First boot may take some time; Please be patient.

Done!!!! You have successfully rooted/flashed your Android smartphone K6 Power. Now you can customize your Lenovo K6 power the way you want it to look like.

RELATED POST

Leave a reply